After-sales service provided :Engineers available to service machinery overseas,Field installation,Free spare parts,Online support,commissioning and training

Computerized :Yes,No

Automatic grade :Semi-Automatic,Automatic

Application :Commodity,Machinery & Hardware,Food,Apparel,Textiles

Driven type :Electric,Pneumatic

Function :Cardboard Automatic Die-cutting Machine,die cutting and creasing,For waste paper stripping,Flat Press Creasing Die Cutting

Contact Now

Add to Cart

View Product Description

Partial Introduction

Feeder unit

• Four pick up and four forward suck heads with angle adjustment to handle different kinds of materials.

Feeding table

• Synchronizing device to adjust the sheet positioning to the front lay by hand during production,Sheet hold-down device (guiding the sheets to the front lays).

Hot stamping section

• Heating base with 20 heating zone each temperature adjustable individually for efficient and accurate temperature control.

Foil advancing unit

• Three sets of longitudinal foil advancing shafts and two sets of lateral foil advancing shafts are driven by servo motors individually programmable for short and long foil stepping.

Mould quick locking device

• Adopt Center-line system and quick locking device to save make ready time.

Plate setting

• 5mm hardened stamping plate or 3.5mm + 1.5mm sandwich stamping plate on top of 15mm precision ground supporting base plate with +/-0.9mm micro adjustment in both running and cross direction for quick set up and easy make ready.

Stripping unit

• Adopt center line system,Upper and lower stripping tool mounting frame can be pulled out for job set up and make ready.

Gripper edge waste removal device

• Gripper edge stripping and removing system with conveyor belt to remove the gripper edge waste sideways to the drive side.

Delivery unit

• Automatic delivery with non – stop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange.two blowers for paper collection can ensure neat collection of thin and thick papers.

Torque limiter

• Taiwan high precision intermittent segmentation ensure high positional precision for long time usage.
• Taiwan torque limiter can accurately protect the artificial operation accident to guarantee the people and machine safety by its sensitive limit protection performance.

Main motor lubrication system

• Taiwan made automatic oil pump cooling circulation system to ensure main motor lubrication of high speed for a long time. Equipped with oil pressure gauge and with oil pressure alarm device.

Auto lubrication system

• Adopt concentrated auto lubrication system to make sure the driven parts working better.

Germany vaccum pump

• Germany Becker oil free blower and vacuum pump.

Technical Parameter

Model	FM--HK3S1050TRMC
Function	1. hot stamping+deep embossing+die cutting+stripping 2. deep embossing+deep embossing+die cutting+stripping
Maximum Sheet Size	1050×750mm
Minimum Sheet Size	400×360mm
Maximum Cutting Size	1040×720mm
Max. Hot Stamping Size	1040×720mm
Max. Embossing Area	1040×720mm
Minimum Gripper Margin	9~17mm
Inner Chase Size	1140×755mm
Stock Range	Paper: from 80 to 2000g/m2, 0.1~2mm, corrugated board: up to 4mm
Die Cutting Accuracy	≤±0.075mm
Common Stamping Accuracy	≤±0.075mm
Hologram Positioning Stamping Accuracy	≤±0.075mm(optional)
Embossing Accuracy	≤±0.075mm
Max. Die Cutting Force	Press1: 600T, Press2: 600T, Press3: 300T
Max.working Speed	6200s/h (Die cutting), 6200s/h (Hot stamping), 6200s/h (Hot pressing)
Max. Feeder Pile Height	1600mm(With wooden pallet)
Max. Delivery Pile Height	1400mm(With wooden pallet)
Max. Gold Foil Diameter	Ф250mm Longitudinal, Ф200mm Transversal
Electric-heated System	20 temperature ranges, 40-180℃ is adjustable
Foil Width	20~1020mm
Press1 Foil Advance Shafts	3 Longitudinal+2 Transversal (optional)
Press2	Equipped with electric heating system
Press3	die cutting+stripping
Machine Dimensions	10878×4557×2658mm(L×W×H) (L: paper prepared track included, W: platform included)
Net Weight of Machine	44T
Full Load Wattage	99KW
Air Requirement	Pressure: 0.6~0.7Mpa, Flow: ≥1m3/min

Inquiry Cart 0